Siemens SIMATIC NET SCALANCE S615 Configuration Manual page 256

Configuring with Web Based Management
4.9 "Security" menu
The table contains the following columns:
● Select
Select the check box in the row to be deleted.
Note
The users preset in the factory as well as logged in users cannot be deleted or changed.
● User Account
Shows the user name.
● Role
Shows the role of the user.
● Description
Displays a description of the user account. The description text can be up to 100 characters
long.
● Remote access
– Only
– None
– Additional
Procedure
Note
Changes in "Trial" mode
Even if the device is in "Trial" mode, changes that you carry out on this page are saved
immediately.
Creating users
1. Enter the name for the user.
2. Enter the password for the user.
3. Enter the password again to confirm it.
4. Select the role of the user.
5. Click the "Create" button.
6. Enter a description of the user.
7. Click the "Set Values" button.
256
Only remote access, which means no rights other than logging into the WBM page for
user-specific firewall.
No remote access. The user cannot log on to the user-specific firewall, but only to the
WBM of the device.
The user can log on to both the WBM of the device and the user-specific firewall.
SCALANCE S615 Web Based Management
Configuration Manual, 11/2019, C79000-G8976-C388-08