Siemens SIMATIC NET SCALANCE S615 Configuration Manual page 115

● HTTPS Server
Enable or disable HTTP access to the WBM.
● HTTPS Port
Specify the port for HTTPS access to the WBM.
● HTTP Services
Specify how the WBM is accessed:
– HTTPS
– HTTP/HTTPS
– Redirect HTTP to HTTPS
● Min. TLS version
Specify which minimum TLS version is used.
● Default Login Page
Specify the login page with which the WBM starts by default.
– Firewall
– Configuration
● SMTP Client
Enable or disable the SMTP client. You can configure other settings in "System > SMTP
Client".
● Syslog Client
Enable or disable the Syslog client. You can configure other settings in "System > Syslog
Client".
● DCP Server
Specify whether or not the device can be accessed with DCP (Discovery and Configuration
Protocol):
– "-" (disabled)
– Read/Write
– Read Only
SCALANCE S615 Web Based Management
Configuration Manual, 11/2019, C79000-G8976-C388-08
Access to the WBM is only possible with HTTPS.
Access to the WBM is only possible with HTTP and HTTPS.
Access via HTTP is automatically diverted to HTTPS.
Logging into the WBM page for user-specific firewall.
Logging into the WBM.
DCP is disabled. Device parameters can neither be read nor modified.
With DCP, device parameters can be both read and modified.
With DCP, device parameters can be read but cannot be modified.
Configuring with Web Based Management
4.5 "System" menu
115