Address Configuration - Siemens SIMATIC NET SCALANCE S615 Configuration Manual

Configuring with Web Based Management
4.8 "Layer 3" menu
4.8.4.4

Address Configuration

Creating or changing the monitored IP addresses
On this page, you can create, modify or delete the IPv4 addresses to be monitored. Each virtual
router can monitor on IPv4 address.
Description
The page contains the following:
● Interface / VRID
Select the ID of the virtual router.
● Associated IP Address
Enter the IPv4 address that the virtual router will monitor.
The table has the following columns:
● Select
Select the check box in the row to be deleted
● Associated IP Address
Shows the IPv4 addresses that the virtual router monitors.
Procedure
1. Select the ID of the virtual router.
2. Enter the IPv4 address that the virtual router will monitor.
3. Click the "Create" button. A new entry is generated in the table.
250
SCALANCE S615 Web Based Management
Configuration Manual, 11/2019, C79000-G8976-C388-08