Siemens SIMATIC NET SCALANCE S615 Configuration Manual page 29

Service Protocol/
Port number
SSH TCP/22
Syslog UDP/514
Syslog over TLS TCP/514
Telnet TCP/23
TFTP UDP/69
TIA Portal Cloud TCP/9023
Connector
With SCALANCE M826 and M804PB, only access via vlan1 is possible in the delivery state (factory setting).
1)
Only open with SCALANCE M826
2)
Only open with SCALANCE S615
3)
Only closed with SCALANCE S615
4)
Explanation for table:
● Default port status
The port status on delivery (factory setting) distinguishes between local and external access.
– Local access: The port is accessed via a local connection (vlan1).
– External access: The port is accessed via an external connection (vlan2).
● Service / Port configurable
Indicates whether the port number or the service can be configured via WBM / CLI.
● Authentication
Specifies whether the communication partner is authenticated.
If optional, the authentication can be configured as required.
● Encryption
Specifies whether the transfer is encrypted.
If optional, the encryption can be configured as required.
SCALANCE S615 Web Based Management
Configuration Manual, 11/2019, C79000-G8976-C388-08
Default port status
Local access External ac‐
cess
1)
Open Closed
Outgoing only Outgoing only
Outgoing only Outgoing only
Closed Closed
Outgoing only Outgoing only
Closed Closed
Security recommendation
Configurable Authentica‐
tion
Service Port
✓ ✓
✓ ✓
✓ ✓
✓ ✓
✓ ✓
✓ ✓
Encryption
✓ ✓
-- --
-- ✓
✓ --
-- --
-- --
29