Siemens SIMATIC NET SCALANCE S615 Configuration Manual page 67

Buttons you require often
The WBM pages of the Basic Wizard contain the following buttons:
Button
Navigation within the pages of the Basic Wizard is possible only with the "Previous" and "Next"
buttons.
4.3.2 IP
Introduction
One of the basic steps in configuration of a device is setting the IPv4 address. The IP address
identifies a device in the network uniquely.
SCALANCE S615 Web Based Management
Configuration Manual, 11/2019, C79000-G8976-C388-08
Configuring with Web Based Management
Description
Goes to the next page
Goes back to the previous page
The Basic Wizard is closed without adopting the settings.
Saves the configuration and exits the Basic Wizard.
4.3 "Wizard" menu
67