Siemens SIMATIC NET SCALANCE S615 Configuration Manual page 88

Configuring with Web Based Management
4.4 "Information" menu
Description
● Severity Filters
You can filter the entries in the table according to severity. To display all the entries, enable
or disable all parameters.
Note
For each severity, a maximum of 400 entries in the table are possible. If the maximum
number of entries is reached for a severity, the oldest entries of this severity are overwritten
in the table. The table remains permanently in the memory.
– Critical
– Warning
– Info
The table has the following columns:
● Restart
Counts the number of restarts since you last reset to factory settings and shows the device
restart after which the corresponding event occurred.
● System Up Time
Shows the time the device has been running since the last restart when the described event
occurred.
● System Time
Shows the date and time when the described event occurred. If no system time is set, the
box displays "Date/time not set".
● Severity
Sorts the entry into the categories above.
● Log Message
Displays a brief description of the event that has occurred.
88
Critical
When this parameter is enabled, all entries of the category "Critical" are displayed.
warning
When this parameter is enabled, all entries of the category "Warning" are displayed.
Informative
When this parameter is enabled, all entries of the category "Info" are displayed.
SCALANCE S615 Web Based Management
Configuration Manual, 11/2019, C79000-G8976-C388-08