Ipsec Vpn; General - Siemens SIMATIC NET SCALANCE S615 Configuration Manual

Industrial ethernet security web based management
Hide thumbs Also See for SIMATIC NET SCALANCE S615:
Table of Contents

Advertisement

● Assigned
Shows the rule set to which this IP rule is assigned. The IP rules can also be assigned to
multiple rule sets. If the IP rule is assigned to all rule sets, "all" is displayed.
● Name
Shows who created the IP rule.
– NETMAP - automatically created firewall rule
4.9.6

IPsec VPN

4.9.6.1

General

On the WBM page, you configure the basic settings for VPN.
Description
The page contains the following:
● Activate IPsec VPN
Enable or disable the IPsec protocol for VPN.
● Enforce strict CRL Policy
When enabled, the validity of the certificates is checked based on the CRL (Certificate
Revocation List). The certificate revocation list lists the certificates issued by the certification
authority that have lost their validity before the set expiry date. You configure the certificate
revocation list to be used on the WBM page "Certificates (Page 267)".
● NAT Keep Alive Time Interval
Specify the interval at which sign of life frames (keepalives) are sent. If there is a NAT device
between two VPN endpoints, when there is inactivity, the connection is deleted from its
dynamic NAT table. To prevent this, keepalives are sent.
SCALANCE S615 Web Based Management
Configuration Manual, 11/2019, C79000-G8976-C388-08
Configuring with Web Based Management
4.9 "Security" menu
281

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents