Parameters In Syslog Messages - Siemens SIMATIC NET SCALANCE S615 Configuration Manual

Appendix A
A.2 Parameters in Syslog messages
A.2

Parameters in Syslog messages

The Syslog messages can contain the following parameters:
Parameter
ip address
src port
dest port
dest mac
src mac
protocol
group
user name
action user name
role
time minute
timeout
failed login count
max sessions
trigger pin
firewall rule
subject
config detail
connection name
304
Description
IPv4 or IPv6 address
Port that is shown as decimal number.
Format: %d
MAC address
Format: %02x:%02x:%02x;%02x:%02x:%02x
Name of the service that has generated this event
or of the Layer 4 protocol used.
Format: %s
String that identifies the group based on its name
Format: %s
String that identifies the authenticated user based
on his/her name
without spaces
Format: %s
Identifies the user based on his/her name This is
not the authenticated user.
Format: %s
Symbolic name for the group role
Format: %s
Number of minutes
Format: %d
Number of failed logins
Format: %d
Number of sessions
Format: %d
String for an IO pin that triggers the event
without spaces
Format: %s
String for a firewall rule
with spaces
Format: %s
String for the subject in the certificate. Used as part
of the certificate-based authentication
with spaces and must also include Unicode char‐
acters
Format: (% S) or (% S% S) for UTF8 code.
String for the configuration
with spaces
Format: %s
Name of the VPN connection
Possible values or example
IP address according to
RFC1035 or RFC4291 Sec‐
tion 2.2
0 ... 65535
00:0C:29:2F:09:B3
Possible entries of:
UDP | TCP | WBM | Telnet |
SSH | TFTP | SFTP
it-service
maier
Peter.Maier
Administrator
44
10
10
DI1
Rule1
(Peter Maier)
OpenVPN
to_Baugruppe1
SCALANCE S615 Web Based Management
Configuration Manual, 11/2019, C79000-G8976-C388-08