Siemens SIMATIC NET SCALANCE S615 Configuration Manual page 197

● Use Interface IP
Specify whether or not the internal IP address of the device will be used.
● Value
Enter the DHCP parameter that is transferred to the DHCP client. The content depends on
the DHCP option.
SCALANCE S615 Web Based Management
Configuration Manual, 11/2019, C79000-G8976-C388-08
Value Option name
1 Subnet Mask The subnet mask is entered au‐
tomatically.
2 Offset time Offset time to the coordinated
universal time UTC.
3 Router The IPv4 address for router in the
subnet of the DHCP client. If the
device itself is the router, the
IPv4 address of the interface is
used.
4 Time server The IPv4 address of the time
server available to the DHCP cli‐
ent.
5 Name server The IPv4 address of the name
server available to the DHCP cli‐
ent.
6 DNS Server The IPv4 address of the DNS
server available to the DHCP cli‐
ent.
If the device itself is the DNS
server, the IPv4 address of the
interface is used.
42 NTP Server The IPv4 address of the NTP
server available to the DHCP cli‐
ent.
66 TFTP server The IPv4 address or the host‐
name of the TFTP server availa‐
ble to the DHCP client.
67 Name of the The name of the boot file that the
boot file client downloads from the TFTP
server.
Configuring with Web Based Management
Option cannot be deleted.
Enter the offset time in seconds in hex‐
adecimal format.
You can specify several IPv4 address‐
es separated by commas.
Enter the address of the TFTP server.
Enter the name of the boot file in the
string format.
4.5 "System" menu
197