Siemens SIMATIC NET SCALANCE S615 Configuration Manual page 68

Configuring with Web Based Management
4.3 "Wizard" menu
Description
The Basic Wizard page contains the following boxes:
● Internal (vlan1)
In this area make the settings for connection to the LAN.
– IP Address
– Subnet Mask
● External (vlan2)
In this area make the settings for connection to the WAN.
– DHCP
– IP Address
– Subnet Mask
– DHCP (Gateway)
● Create new gateway
You define the gateway in this area.
– IP Address
68
Enter the IPv4 address of the interface that is unique within your network.
Enter the subnet mask of the subnet you are creating.
Enable or disable the DHCP client.
When enabled, the required settings such as IP address and subnet mask are assigned
to the DHCP client by the DHCP server.
The DHCP client is disabled by default.
Enter the IPv4 address of the interface.
Enter the subnet mask of the subnet you are creating. Subnets on different interfaces
must not overlap.
Shows the IP address of the gateway when the DHCP server has transmitted it.
Enter the IP address of the default gateway to be able to communicate with devices in
another subnet.
SCALANCE S615 Web Based Management
Configuration Manual, 11/2019, C79000-G8976-C388-08