Device - Siemens SIMATIC NET SCALANCE S615 Configuration Manual

4.3.3

Device

Introduction
On this Basic Wizard page, you configure the general device information.
Description
The Basic Wizard page contains the following boxes:
● System Name
You can enter the name of the device. If you configure this box, this configuration is adopted
and displayed in the selection area. A maximum of 255 characters are possible.
The system name is also displayed in the CLI input prompt. The number of characters in the
CLI input prompt is limited. The system name is truncated after 16 characters.
● Device Location
You can enter the location where the device is installed. The location is displayed in the
selection area. A maximum of 255 characters are possible.
Note
Permitted characters
The following printable ASCII characters (0x20 to 0x7) are permitted in the input fields:
● 0123456789
● A...Z a...z
● !"#$%&'()*+,-./:;<=>?@ [\]_{|}~^`
● System Contact
You can enter a contact person responsible for managing the device. A maximum of 255
characters are possible.
SCALANCE S615 Web Based Management
Configuration Manual, 11/2019, C79000-G8976-C388-08
Configuring with Web Based Management
4.3 "Wizard" menu
69