Vlan; General - Siemens SIMATIC NET SCALANCE S615 Configuration Manual

Configuring with Web Based Management
4.7 "Layer 2" menu
Description
● Passive Listening
When enabled the function ensures that the BPDUs from the RSTP network are forwarded
transparently and return again. If this was not the case, loops would form at the connection
point between RSTP and the ring.
4.7.2

VLAN

4.7.2.1

General

VLAN configuration page
On this page you specify whether or not the device forwards frames with VLAN tags
transparently (IEEE 802.1D/VLAN-unaware mode) or takes VLAN information into account
(IEEE 802.1Q/VLAN-aware mode). If the device is in the "802.1Q VLAN Bridge" mode, you can
define VLANs and specify the use of the ports.
The possible settings on this page depend on what you select in the "Base Bridge Mode" box.
Note
Changing the Agent VLAN ID
If the configuration PC is connected directly to the device via Ethernet and you change the
agent VLAN ID, the device is no longer reachable via Ethernet following the change.
216
SCALANCE S615 Web Based Management
Configuration Manual, 11/2019, C79000-G8976-C388-08