Wizard" Menu; Basic Wizard - Siemens SIMATIC NET SCALANCE S615 Configuration Manual

Configuring with Web Based Management

4.3 "Wizard" menu

After successful login, the WBM page "User Specific Firewall Information" opens.
The current ruleset and the remaining time are displayed. If needed, the user can extend the
access time via the "Reset Timeout" button.
4.3 "Wizard" menu
4.3.1

Basic Wizard

Introduction
With the Basic Wizard, menus guide you through the configuration of the most important
parameters. On the Basic Wizard pages, you can only configure the parameters important for
the basic functionality. You make further settings when you have finished with the Basic Wizard.
Requirement
● The device has an IP address and can be reached via the Ethernet interface.
● You are logged on in the WBM as a user with administrator rights.
● When shipped or following a "Restore Factory Defaults and Restart" the device can be
reached with the values preset in the factory. For more detailed information, refer to the
section "Requirements for operation (Page 16)".
Starting the Basic Wizard
Click on "Wizard > Basic Wizard" in the navigation area to start the Basic Wizard.
If you log in the first time or log on after a "Restore Factory Defaults and Restart", the Basic
wizard is started automatically after you have changed the default password.
66
SCALANCE S615 Web Based Management
Configuration Manual, 11/2019, C79000-G8976-C388-08