Configuration - Siemens SIMATIC NET SCALANCE S615 Configuration Manual

Description of the displayed values
This table contains the following columns:
● Interface
Shows the PPP interface. The entry is a link. If you click on the link, the corresponding
configuration page is opened.
● Name
Shows the name of the PPP interface.
● Type
Shows the protocol of the PPP connection.
● Operation
Shows whether the PPP connection is activated or deactivated.
● Status
Shows the status of the PPP connection.
– Ready
– Connecting
– Connected
– Error
– Stopped
4.6.2.2

Configuration

On this page, you configure the PPP connection. The point-to-point protocol (PPP) allows the
connection of an external ADSL modem to an Ethernet interface and via this then a connection
to the Internet. The interface is also called PPP interface.
The device acts as a router and logs in with the user name and password. All connected
devices can use the PPP connection.
SCALANCE S615 Web Based Management
Configuration Manual, 11/2019, C79000-G8976-C388-08
The PPP connection can be configured and enabled.
The PPP connection is configured, enabled and the connection is being established.
The PPP connection is established.
Error status in which operator intervention is required, e.g. wrong password.
Error message of the server, e.g. incorrect login data. There is a wait time before login
is attempted again.
Configuring with Web Based Management
4.6 "Interfaces" menu
213