Siemens SIMATIC NET SCALANCE S615 Configuration Manual page 124

Configuring with Web Based Management
4.5 "System" menu
File type
RunningSINEMA‐
Config
Script
SINEMAConfig
StartupInfo
Users
WBMFav
X509Cert
See also
Overview (Page 265)
Passwords (Page 136)
Certificates (Page 49)
124
Description
You save the current device configuration in this file type for transfer to STEP 7
Basic/Professional. The file can be imported in STEP 7 Basic/Professional and
installed on a device with the same article number and firmware version.
Before you can save a file, you must assign a password for the "RunningSINE‐
MAConfig" in the WBM under "System > Load&Save > Passwords". You also
need this password to import the file into STEP 7 Basic/Professional.
See also "SINEMAConfig"
Text file with CLI commands
You can upload a script file in a device. The CLI commands it contains are
executed appropriately.
CLI commands for saving and loading files cannot be executed with the CLI script
file.
You load configuration data that was exported via STEP 7 Basic/Professional for
transfer to the WBM with this file type.
To load a file, you must assign a password for the "SINEMAConfig" under "Sys‐
tem > Load&Save > Passwords". You also need this password to export the file
from STEP 7 Basic/Professional.
See also "RunningSINEMAConfig"
Startup log file
This file contains the messages that were entered in the log during the last start‐
up.
This file contains the assignment of the user names to the corresponding pass‐
words.
WBM favorites
This file contains the favorites that you created in the WBM. You can download
this file and upload it into other devices.
Various nodes are certified with certificates.
The following file types can be loaded into the device:
● .crt, pem, zip: Maximum file name length 255 characters
● .p12: Maximum file name length 248 characters
There are files to which access is password protected. To successfully load the
file into the device, enter the password specified for the file on the WBM page
"Passwords".
The loaded files are listed in "Security > Certificates > Overview".
For more information on certificates, refer to section "Certificates".
SCALANCE S615 Web Based Management
Configuration Manual, 11/2019, C79000-G8976-C388-08