Settings; Advanced Settings; Inverter Data - Ingeteam INGECON SUN PowerMax TL U B 1000 Vdc Series Installation And Operation Manual

Display control

19.6.4. Settings

In this menu you can make the following settings:
Date & time
Languages
Modbus ID
Partial deletion
Strings settings
Power settings
Test fans

19.6.5. Advanced settings

CAUTION
The settings included within this menu can only be modified by a qualified installer.
Ingeteam accepts no liability for incorrect use of the installer password nor the consequences that may arise
from incorrect configuration of the unit by the user and / or the installer.
INFO
To modify the parameters of this menu the installer password will be requested. The installer password is 3725.
Within this menu you can change the password, adjust the voltage and frequency values or modify the country and
the regulations applicable to the inverter.

19.6.6. Inverter data

From this menu you can consult different data referring to the inverter.
ABK2027IQE01_A - Installation and Operation Manual
To modify the date and time of the inverter.
Selection of the language for the text on the inverter display.
Assignation of a number that identifies the inverter. In installations with more than one
inverter, each one must be assigned a different number. Ingeteam recommends using
correlative numbering.
Deletes the partial meters.
Not applicable.
Reduce the unit power.
By accessing this option it is possible to run a test to check the inverter fans are working
properly.
Ingeteam
137