Table of Contents
Advertisement
Ingeteam
3.
Crimp the wire ends according to the wire gauge being used.
4.
Open the terminal. The terminals used in this terminal strip are of the clamp type. To insert the cable into
the desired position press with a flat head screwdriver, insert the cable and then remove the screwdriver.
The phase is wired at -XAUX.1 and neutral at -XAUX.2.
86
Connecting auxiliary services
ABK2027IQE01_A - Installation and Operation Manual
- Quick Links:
- Electrical Characteristics of the Unit
Hide quick links:
Advertisement
Table of Contents
