Equipment Reception; Packaging Symbols; Equipment Identification; Transport Damage - Ingeteam INGECON SUN PowerMax TL U B 1000 Vdc Series Installation And Operation Manual

Equipment reception

3. Equipment reception

3.1. Packaging symbols

Bear in mind the following symbols present on the packaging of the unit:
Move transport packaging with this side up.
Do not use sharp tools to open the shipping packaging.
Prevent the unit from becoming wet.
Do not place anything on top of the shipping packaging.
The contents of the shipping container are fragile.
Keep the unit in its packaging until immediately before installation. Maintain the unit upright at all times.

3.2. Equipment identification

The serial number of the unit is its unique identifier. You must quote this number in any communication with
Ingeteam.

3.3. Transport damage

If the unit has been damaged during transport, proceed as follows:
1. Do not proceed with the installation.
2. Notify the distributor immediately within 5 days of receipt of the unit.
If ultimately the unit has to be returned to the manufacturer, the original packaging must be used.
ABK2027IQE01_A - Installation and Operation Manual
Ingeteam
41