Anti-Humidity Elements; Cooling - Ingeteam INGECON SUN PowerMax TL U B 1000 Vdc Series Installation And Operation Manual

Ingeteam

6.5. Anti-humidity elements

Before making the connections, you need to remove the anti-humidity elements from the unit The following figure
displays the location of said elements.

6.6. Cooling

CAUTION
Install the unit so that the air entering for cooling does not come from air expelled by the unit or any other heat
source.
Do not place any object on top of the unit.
48
≥ M10
A
≥ 2.83 in (72 mm)
Preparation for installing the unit
A-A
A
ABK2027IQE01_A - Installation and Operation Manual