Shutting Down - Ingeteam INGECON SUN PowerMax TL U B 1000 Vdc Series Installation And Operation Manual

Commissioning
CAUTION
Manual operation of the DC switch limits unit safety and protection. Ingeteam accepts no liability for damage
resulting from this action.
INFO
By default, the DC switch must always be in AUTO. Otherwise an alarm is activated.

18.1.2. Shutting down

Make sure that during the installation and connection operations the level of protection is not altered.
Maintain both the power and signal wiring long enough in all connections to avoid undesirable strain on the
internal electrical connections.
Check that the cables used have the same degree of protection as the unit itself.
Folding doors
If the unit doors have opened at some point, close them and check they are properly closed.
CAUTION
The guarantee does not cover damage caused by inadequate sealing of the unit.
Safety measures
INFO
Opening any of the doors on the unit causes the unit to be disconnected from the grid, go into manual stop
status, and opens the corresponding motorized DC switch.
ABK2027IQE01_A - Installation and Operation Manual
Ingeteam
125