Equipment Transport; Transport Using A Crane - Ingeteam INGECON SUN PowerMax TL U B 1000 Vdc Series Installation And Operation Manual

Equipment transport

Ingeteam
5. Equipment transport
You must protect the unit, during transport, from mechanical knocks, vibrations, water splashes (rain) and any
other product or situation which may damage it or alter its behavior.
Failure to observe these instructions may lead to loss of warranty on the product, for which Ingeteam is not
responsible.
INFO
Ingeteam recommends transporting the unpacked equipment using a crane wherever possible.

5.1. Transport using a crane

When lifting by crane, you should use the lifting beams fitted to the top of the unit, as shown below.
Ensure that the load is distributed evenly along the lifting
beam.
Tie individual cables, chains or ropes to each of the holes,
making sure the angle is less than or equal to 45º to vertical
and ensuring that the cables are as vertical as possible.
It is always advisable to use a load frame as in the adjoining
figure for a proper distribution of the loads, maintaining a 90°
angle.
9 0 º
ABK2027IQE01_A - Installation and Operation Manual 43