Description Of Cable Inlets; Utility - Interactive And Grid Support Utility - Interactive Modes; Description Of Operation Modes - Ingeteam INGECON SUN PowerMax TL U B 1000 Vdc Series Installation And Operation Manual

Unit description

2.19. Description of cable inlets

These units have wired accesses on the lower part.
1. Wiring options and auxiliary services. Cover
with membrane, permitted wiring diameter
0.24 ~ 0.51 in (6 ~ 13 mm).
2. Fiber optic for synchronization. M25 packing
gland, two holes, permitted wiring diameter
0.04 ~ 0.12 in (1 ~ 3 mm).

2.20. Utility - Interactive and Grid Support Utility - Interactive modes

This inverter can be configured in two different operation modes: Utility - Interactive mode and Grid Support Utility
– Interactive mode.

2.20.1. Description of operation modes

The difference between the modes is centered on the performance in cases of grid instability. While the Utility
- Interactive mode only disconnects from the grid when the parameters are outside the range, the Grid Support
Utility - Interactive mode supports the grid when certain errors appear (LVRT, reactive power regulation, etc.),
thereby keeping the inverter connected.
It is not possible to configure the unit with both modes simultaneously.
The Grid Support Utility - Interactive mode has specific utility interconnectivity settings that allow providing grid
support functions such as voltage and frequency or step voltage and frequency adjustment. Products that depend
on the interconnection protection functions or devices for internal or external public services are specifically
identified.
The Grid Support Utility - Interactive mode is currently available in accordance with the regulations of the two
states that include this type of requirement in the USA: California and Hawaii. The two SRDs used to certify the
unit were:
ABK2027IQE01_A - Installation and Operation Manual
1
1
1
1
1
3
2
3.
1
1
1
1
1
1
Ethernet. M25 packing gland, one hole,
permitted wiring diameter 0.24 ~ 0.51 in
(6 ~ 13 mm).
Ingeteam
37