Settings - Ingeteam Ingecon Sun Smart U Installation And Operation Manual

Installation and Operation Manual
INGECON®SUN SMART U
AAS2000IKI05

9.6 Settings

AAS2000IKI05
Rev. _
Date: February 2011
Date and Time
This menu serves to change the current time and date. The internal clock
automatically changes from summer to winter time.
Inverter number change
This menu assigns the inverter a node number. This is required to configure
communications.
Language
This option serves to select the display language.
From the main screen, press the "down" arrow (an arrow pointing downwards)
to access the main menu.
From the main menu, use the
to the "Settings" settings position, once highlighted press
the sub-menu.
In the "Settings" submenu, use the
menu to the "Idioma" language position. Once highlighted, press
access the language change screen.
The language change screen is as follows:
Press the arrows
Grid quality
This menu serves to modify the grid quality parameters. This menu is only
enabled once the security code has been entered.
Grounding
This option serves to modify the PV array grounding type. This menu is only
available once the security code has been entered.
Connection time
This menu serves to modify the on-hold time before the inverter connects to
the grid. This menu is only available once the security code has been entered.
Total reset
This option allows the user to reset all the inverter counters. This menu is
only available once the security code has been entered.
Other settings
A number of internal settings.
CAN number change
This menu serves to change the electronics block node number. This is
necessary to configure the speed controllers. Given the fact that this action
includes operations which alter the hardware, the equipment configuration
section explains how to make the node number change.
or keys to scroll through the menu
or keys to scroll through the
to scroll through the different languages.
to access
OK
to
OK
Page 65