Connection of the DCAC connections module
Synchronization of two inverters
To perform the synchronization of two inverters wired according to the following diagram, using the fiber optics
provided by Ingeteam.
Master
1
1-2
a b c
1
d e
Inverter internal wiring
Wiring to do by installer
If an incident on the master inverter (1) on the slave inverter (2) disconnect the fiber optics cable 1-2 from the
connector 2.e and configure this inverter as master via its synchronization card switch.
ABK2027IQE01_A - Installation and Operation Manual
Slave
2
a b c
2
d e
Ingeteam
95