Options; Monitoring Components External To The Unit - Ingeteam INGECON SUN PowerMax TL U B 1000 Vdc Series Installation And Operation Manual

Unit description
Ancillary services feeder
In the event of absence of plant grid power, this kit allows to supply the Low Voltage system, so that the inverter
will supply the ancillary services as long as there is voltage in the photovoltaic panels and the inverter firmware has
been configured for this.
An example of the use of this kit is to supply the photovoltaic panel trackers in order to place them in safety
position.
Inverter
QDC

2.5. Options

The standard units provide the ability to set various standard options. The installer can decide to use them or not
depending on the requirements of each installation.
INFO
For more information about the connections see section "14. Connection options".

2.5.1. Monitoring components external to the unit

This option allows you, via a connection terminal on the equipment, to supervise the proper performance of its
external elements.
This monitoring is carried out using normally closed voltage-free contacts. Should one of the contacts be open (due
to a fault in the monitored item) the inverter will generate an alarm and shut down.
ABK2027IQE01_A - Installation and Operation Manual
F2
K1
T1
K2
K1
Ancillary services feeder kit diagram
QAC
F2
K2
Taux
Vaux
Ingeteam
T2
K1
K2
17