Important safety instructions
Personal Protective Equipment
When working on the unit, use the following safety equipment recommended by Ingeteam as a minimum.
Name
Safety footwear
Helmet with face shield
Working clothes
Dielectric gloves
Hearing protection device
Anti-impact glasses
Tools and / or equipment used in live work must have at least class III-1000 Volts insulation.
Should the country's regulations demand another kind of personal protection, you should appropriately supplement
the equipment recommended by Ingeteam.
Symbols on the units
ABK2027IQE01_A - Installation and Operation Manual
In compliance with standard ASTM F2413-05
In compliance with standard ANSI/ISEA Z89.1-2009, wherever there are
directly accessible live parts
Close-fitting, non-flammable, 100% cotton
In compliance with standard ANSI/ISEA 105-2011
In compliance with standard ANSI S12.6-1997
Use of anti-impact glasses when accessing the fan area.
Ø 1
Connection from cable and phase 1 terminal.
Ø 2
Connection from cable and phase 2 terminal.
Ø 3
Connection from cable and phase 3 terminal.
DC outlet.
AC outlet.
Ground terminal.
Grounded points.
ON
OFF
POTENTIAL RISK OF ARC
FLASH
Explanation
DANGER
RISQUE D'ARC
ÉLECTRIQUE
Ingeteam
7