Dimensions; Characteristics Of The Electrical Installation - Ingeteam INGECON SUN PowerMax TL U B 1000 Vdc Series Installation And Operation Manual

Unit description Ingeteam

2.12. Dimensions

m )
0 3 7 m
i n ( 1
4 0 . 8 3
1 1 0 .
9 i n (
2 8 1 6
m m
)
)
3 m m
i n ( 8 2
3 2 . 4

2.13. Characteristics of the electrical installation

These units are designed for connection to a dedicated grid with an IT-type neutral connection scheme. The IT
system neutral connection as a reference point is recommended.
An IT scheme has no directly grounded feed point.
In this system, the resulting intensity of a first phase against mass or phase against ground fault is sufficiently low
as to not cause the appearance of dangerous contact voltages.
The PV array must be installed, insulated from the earth in a configuration called floating to assure protection
against direct and indirect contacts. If requiring grounding for any part of the installation´s DC circuit, the
equipment must be equipped with the PV array grounding kit. If selecting this kit, see the installation and
operation manual.
ABK2027IQE01_A - Installation and Operation Manual 31