Ingeteam
Medium height busbars for direct connection to transformer busbars
The AC phase busbars are located on the left or right side, depending on the unit configuration.
The connection is made directly to the transformer busbars.
The dimensions of the inverter busbars are as follows:
Connection for lower cable input
CAUTION
After connecting the cables to the inverter, ensure that the current distribution through the parallel conductors
is correct.
108
T
S
R
a
0.39 in (10 mm)
b
1.57 in (40 mm)
c
0.59 in (15 mm)
d
1.75 in (44.5 mm)
f
e
c
d
e
0.59 in (15 mm)
f
1.75 in (44.5 mm)
g
4.84 in (123 mm)
ABK2027IQE01_A - Installation and Operation Manual
AC connection