Maintenance
Ingeteam
22.3.1. Replacement of fans
These inverters have four fans located on the mid/lower part of the power module.
-FAN_R
-FAN_S
-FAN_T
-FAN_L1
If a fan has come to the end of its life or is malfunctioning, it should be replaced.
To replace the three fans aligned on the middle of the module, go to the procedure for replacement of the lower
fan. Once you have accessed the power module, follow these steps for each case:
Mid-lower area fans (-FAN_R, -FAN_S, -FAN_T)
1.
Uninstall the aerial connector of the fan to be replaced.
ABK2027IQE01_A - Installation and Operation Manual
161