Remote Control For Dc Switch And Ac Thermomagnetic Circuit Breaker; Location Of Components - Ingeteam INGECON SUN PowerMax TL U B 1000 Vdc Series Installation And Operation Manual

Ingeteam

2.5.2. Remote control for DC switch and AC thermomagnetic circuit breaker

It enables remote manual stop (opening) of the DC switch and the AC thermomagnetic circuit breaker via a
normally closed voltage-free contact. When the contact is opened it changes the unit's status to manual stop and
remotely trips the DC switch and the AC thermomagnetic circuit breaker.
Closing a normally closed contact closes the DC switch and starts up the unit.

2.6. Location of components

This section graphically describes the location of the main components of the unit. Throughout the document
reference is made to this section repeatedly in order to facilitate the location of these elements.
Component
-S1 Emergency push-button
Circuit breaker
AC thermomagnetic switch access
access
Individual waste handling (for more information see section "23. Waste handling")
(WH)
18
Ventilation protection
-S1
Description
Display
(WH)
Component
Display Display for interacting with the inverter
(WH)
Ventilation system protection for
Ventilation protection
extreme weather conditions
ABK2027IQE01_A - Installation and Operation Manual
Unit description
Description