At+Ftprename Rename The Specified File On The Remote Machine - SimCom SIM5300E At Command Manual

Execution Command
AT+FTPQUIT
Reference
11.2.27 AT+FTPRENAME Rename the Specified File on the Remote
Machine

AT+FTPRENAME Rename the Specified File on the Remote Machine

Test Command
AT+FTRENAME=?
Execution Command
AT+FTPRENAME
Parameters
Reference
SIM5300E AT Command Manual V1.02
Response
If the current operation is GET method:
OK
+FTPGET: 1,80
If the current operation is PUT method:
OK
+FTPPUT: 1,80
If FTP is in idle state:
ERROR
Note:
Response
OK
Response
If success:
OK
+FTPRENAME:1,0
If failed:
OK
+FTPRENAME:1,<error>,0
If error is related to ME functionality:
+CME ERROR: <err>
<error> See "AT+FTPGET"
Note:
The file is specified

"AT+FTPGETPATH" commands.
The new file name is set by "AT+FTPPUTNAME=<value>" command.

by the "AT+FTPGETNAME" and
206