At+Ciurc Enable Or Disable Initial Urc Presentation - SimCom SIM5300E At Command Manual

AT+MORING=<mode>
Parameters
Reference
5.2.13

AT+CIURC Enable or Disable Initial URC Presentation

AT+CIURC Enable or Disable Initial URC Presentation
Test Command
AT+CIURC=?
Read Command
AT+CIURC?
Write Command
AT+CIURC=<mode>
Parameters
Reference
SIM5300E AT Command Manual V1.02
OK
If error is related to ME functionality:
+CME ERROR: <err>
Unsolicited Result Code
MO RING
the call is alerted.
MO CONNECTED
the call is established.
<mode>
0 Not show call state of mobile originated call
1 Show call state of mobile originated call. After the call number
is dialed, the URC strings of MO RING will be sent if another
call is alerted and the URC strings of MO CONNECTED will be
sent if the call is established.
Response
+CIURC: (list of supported<mode>s)
OK
Response
+CIURC:<mode>
OK
Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
<mode>
0 Disable URC presentation.
1 Enable URC presentation
Note:
When module is powered on and initialization procedure is over.
99