At+Smtpextflie Smtp Extend File Mode - SimCom SIM5300E At Command Manual

14.2.13 AT+SMTPEXTFLIE SMTP Extend File Mode

AT+SMTPEXTFILE SMTP Extend File Mode
Test Command
AT+SMTPEXTFILE =?
Read Command
AT+SMTPEXTFILE?
Write Command
1) if mode is 0 or 1
AT+SMTPEXTFILE=<mode>
2) if mode is 2
AT+SMTPEXTFILE
=<mode>,<id>,< file
name>,<len>
3) if mode is 3
AT+SMTPEXTFILE=<mode>,<id>
4) if mode is 4
AT+SMTPEXTFILE=<mode>,<id>
,<pos>,<len>,<timeout>
5) if mode is 6
AT+SMTPEXTFILE=<mode>,<id>
[,<pos>[,<len>]]
Parameters
SIM5300E AT Command Manual V1.02
Response
OK
Response
+SMTPEXTFILE: <mode>
OK
Response
If mode is 0 or 1
OK
If mode is 2, add attachment <id>
OK
If mode is 3, delete attachment <id>
OK
If mode is 4, load data from serial port to attachment <id>
DOWNLOAD
OK
If mode is 6, print attachment<id> to serial port.
+SMTPEXTFILE: 6,<id>,<pos>,<len>
//data
OK
If error is related to ME functionality:
+CME ERROR: <err>
<mode>
0 Use default SMTP FILE method
1 Use extend SMTP FILE method
2 Add an attachment for SMTP.
3 Delete an attachment for SMTP.
4 Load data from serial port to an attachment.
6 Print an attachment to serial port.
<id> 0-9, from attachment <0> to <9>, total attachment size can not
exceed 300k.
<pos> data offset address 0-300k
<len> data length 0-300k
237