At+Cipats Set Auto Sending Timer; At+Cipsprt Set Prompt Of '>' When Module Sends Data - SimCom SIM5300E At Command Manual

Reference
7.2.17

AT+CIPATS Set Auto Sending Timer

AT+CIPATS Set Auto Sending Timer
Test Command
AT+CIPATS=?
Read Command
AT+CIPATS?
Write Command
AT+CIPATS=<mode>[,<time>]
Parameters
Reference
7.2.18 AT+CIPSPRT Set Prompt of '>' When Module Sends Data
AT+CIPSPRT Set Prompt of '>' When Module Sends Data
Test Command
AT+CIPSPRT=?
Read Command
AT+CIPSPRT?
SIM5300E AT Command Manual V1.02
+RECEIVE,<n>,<data length>:
Response
+CIPATS: (list of supported <mode>s),(list of supported <time>)
OK
Response
+CIPATS: <mode>,<time>
OK
Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
<mode> A numeric parameter which indicates whether set timer when
module is sending data
0 Not set timer when module is sending data
1 Set timer when module is sending data
<time>
1..100 A numeric parameter which indicates the seconds after which
the data will be sent
Response
+CIPSPRT: (list of supported <send prompt>s)
OK
Response
+CIPSPRT: <send prompt>
162