At+Ciphexs Set Output-Data Format With Suffix; At+Cipssl Enable Tcp Ssl Function - SimCom SIM5300E At Command Manual

Reference
7.2.32

AT+CIPHEXS Set Output-data Format with suffix

AT+CIPHEXS Set Output-data Format with suffix
Test Command
AT+CIPHEXS=?
Read Command
AT+CIPHEXS?
Write Command
AT+CIPHEXS=<mode>
Parameters
Reference
7.2.33

AT+CIPSSL Enable TCP SSL function

AT+CIPSSL Enable TCP SSL function
Test Command
AT+CIPSSL=?
Read Command
AT+CIPSSL?
Write Command
AT+CIPSSL=<n>
Parameters
SIM5300E AT Command Manual V1.02
Response
+CIPHEXS: (list of supported <mode>s)
OK
Response
+CIPHEXS: <mode>
OK
Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
<mode>
0 The default format of output data
1 Set the output data with suffix"0d 0a".
2 Set the output data in HEX format with suffix "0d 0a".
Note:
This command is only available when"AT+CIPHEAD=1"
Response
+CIPSSL: (0-1)
OK
Response
+ CIPSSL: <n>
OK
Response
OK
<n>
0 Enable SSL function
174