At+Cmmsview Get The Mms Into Buffer And Show The Information - SimCom SIM5300E At Command Manual

Write Command
AT+CMMSRECV=<index>
Parameters
Reference
13.2.16 AT+CMMSVIEW
information

AT+CMMSVIEW Get the MMS into buffer and show the information

Test Command
AT+CMMSVIEW=?
SIM5300E AT Command Manual V1.02
Response
+CMMSRECV: "<sender>","<time>","<subject>",<size><CR><LF>
list of <fileIndex,name,type,filesize><CR><LF>
If error is related to ME functionality:
+CME ERROR: <err>
<index> The index of the push message saved in the SIM message box.
<sender> The address of the sender
<time> The time to receive the MMS
<subject> the title of the MMS
<size> The size of the MMS
<fileIndex,name,type,filesize>
included in the MMS. The types are defined as following.
2 text
3 text/html
4 text/plain
5 image
6 image/gif
7 image/jpg
8 image/tif
9 image/png
10 smil
Note:
This command is valid only when it is not allowed to edit MMS and

the buffer for MMS will be clear up. So it is recommended to save
the MMS in the buffer before receiving MMS.
The received MMS is just saved in the buffer but not saved in the

flash.
Get the MMS into buffer and show the
Response
OK
The index, name and size of every file
220