At+Cgeqreq 3G Quality Of Service Profile(Requested) - SimCom SIM5300E At Command Manual

Reference
6.2.13

AT+CGEQREQ 3G Quality of Service Profile(Requested)

AT+CGEQREQ 3G Quality of Service Profile (Requested)
SIM5300E AT Command Manual V1.02
(refer 3GPPTS 24.008 [8] subclause 10.5.6.5).
<Traffic_handling_priority>
a numeric parameter (1,2,3,...) that specifies the relative importance for
handling of all SDUs belonging to the UMTS bearer compared to the SDUs of
other bearers (refer 3GPPTS 24.008 [8] subclause 10.5.6.5).
<Source_Statistics_Descriptor>
Supported in R7 P S a numeric parameter that specifies characteristics of the
source of the submitted SDUs for a PDP context. This parameter should be
provided if the Traffic class is specified as conversational or streaming (refer
3GPP TS 24.008 [8] subclause10.5.6.5).
0 Characteristics of SDUs is unknown (default value)
1 Characteristics of SDUs corresponds to a speech source
Other values are reserved.
<Signalling_Indication>
Supported in R7 P S a numeric parameter used to indicate confirmat content
of submitted SDUs for a PDP context. This parameter should be provided if
the Traffic class is specified as interactive (refer 3GPP TS 24.008 [8] subclause
10.5.6.5).
0 PDP context is not optimized for confirmat (default value)
1 PDP context is optimized for confirmat
<PDP_type>
(see +CGDCONT command). If a value is omitted for a particular
class then the value is considered to be unspecified.
139