At+Cpwd Change Password - SimCom SIM5300E At Command Manual

Parameters
Reference
3GPP TS 27.007 [13]
3.2.25

AT+CPWD Change Password

AT+CPWD Change Password
Test Command
AT+CPWD=?
Write Command
AT+CPWD=<fac>,<oldpwd>,
<newpwd>
Parameters
SIM5300E AT Command Manual V1.02
If error is related to ME functionality:
+CME ERROR: <err>
<code>
READY MT is not pending for any password
SIM PIN MT is waiting SIM PIN to be given
SIM PUK MT is waiting for SIM PUK to be given
PH_SIM PIN ME is waiting for phone to SIM card (antitheft)
PH_SIM PUK ME is waiting for SIM PUK (antitheft)
SIM PIN2 PIN2, e.g. for editing the FDN book possible only if preceding
Command was acknowledged with +CME ERROR:17
SIM PUK2 Possible only if preceding Command was acknowledged with
error +CME ERROR: 18.
<pin> String type; password
<new pin> String type; If the PIN required is SIM PUK or SIMPUK2: new
password
Response
TA returns a list of pairs which present the available facilities and the
maximum length of their password.
+CPWD:list of supported(<fac>,<pwdlength>)s
OK
Response
TA sets a new password for the facility lock function.
OK
<pwdlength> Integer max. length of password
<fac>
"AO "BAOC (Barr All Outgoing Calls)
"OI" BOIC (Barr Outgoing International Calls)
"OX" BOIC-exHC (Barr Outgoing International Calls except to Home
Country)
"AI" BAIC (Barr All Incoming Calls)
"IR" BIC-Roam (Barr Incoming Calls when Roaming outside the
home country)
"AB" All Barring services
46