At+Cgqreq Quality Of Service Profile (Requested) - SimCom SIM5300E At Command Manual

Read Command
AT+CGQMIN?
Write Command
AT+CGQMIN=<cid>[,<precede
nce>[,<delay>[,<reliability>[,<
peak>[,<mean>]]]]]
Parameters
Reference
6.2.4

AT+CGQREQ Quality of Service Profile (Requested)

AT+CGQREQ Quality of Service Profile (Requested)
SIM5300E AT Command Manual V1.02
Response
+CGQMIN: <cid>,<precedence>,<delay>,>reliability>,<peak>,<mean>
[<CR><LF>+CGQMIN:
<cid>,<precedence>,<delay>,<reliability>,<peak>,<mean>
[...]]
OK
Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
<cid>
1..310 A numeric parameter which specifies a particular PDP context
definition (see +CGDCONT command)
<precedence>
0 QOS precedence class subscribed value
1.. 3 QOS precedence class
<delay>
0 QOS delay class subscribed value
1..4 QOS delay class subscribed
<reliability>
0 QOS reliability class subscribed value
1..5 QOS reliability class.
<peak>
0 QOS peak throughput class subscribed value
1.. 9 QOS peak throughput class
<mean>
0 QOS mean throughput class subscribed value
1..18 QOS mean throughput class
31 QOS mean throughput class best effort
Note
128