SimCom SIM5300E At Command Manual page 148

Write Command
AT+CGEQMIN=<cid>
[,<Traffic_class>[,<Maximum_
bitrate_UL>[,<Maximum_bitra
te_DL> [,<
Guaranteed_bitrate_UL>
[,<Guaranteed_bitrate_
DL> [,<Delivery_order>
[,<Maximum_SDU_size>
[,<SDU_error_ratio>
[,<Residual_bit_error_ratio>[,
<Delivery_of_erroneous_SDUs
>[,<Transfer_delay>[,<Traffic_
handling_priority>[,<Source_s
tatistics_descriptor>[,<Signalli
ng_indication>]]]]]]]]]]]]]]
Parameters
SIM5300E AT Command Manual V1.02
OK
If error is related to ME functionality:
+CME ERROR: <err>
<cid>
a numeric parameter which specifies a particular PDP context definition (see
+CGDCONT command). The following parameters are defined in 3GPP TS
23.107[46].
<Traffic_class>
a numeric parameter that indicates the type of application for which the
UMTS bearerservice is onfirmat. 0 conversational 1 streaming 2 interactive 3
background Other values are reserved.
<Maximum_bitrate_UL>:
a numeric parameter that indicates the maximum number of kbits/s
delivered to UMTS(up-link traffic) at a SAP. As an example a bitrate of
32kbit/s would be specified as '32'(e.g. AT+CGEQMIN=...,32, ...) (refer 3GPP
TS 24.008 [8] subclause 10.5.6.5).
<Maximum_bitrate_DL>:
a numeric parameter that indicates the maximum number of kbits/s
delivered by UMTS(down-link traffic) at a SAP. As an example a bitrate of
32kbit/s would be specified as'32' (e.g. AT+CGEQMIN=...,32, ...) (refer 3GPP
TS 24.008 [8] subclause 10.5.6.5).
<Guaranteed_bitrate_UL>:
a numeric parameter that indicates the guaranteed number of kbits/s
delivered to UMTS(up-link traffic) at a SAP (provided that there is data to
deliver). As an example a bitrate of 32kbit/s would be specified as '32' (e.g.
AT+CGEQMIN=...,32, ...) (refer 3GPP TS24.008 [8] subclause 10.5.6.5).
137