At+Cmmscid Set The Network Parameters For Mms; At+Cmmssendcfg Set The Parameters For Sending Mms - SimCom SIM5300E At Command Manual

Parameters
Reference
13.2.3

AT+CMMSCID Set the Network Parameters for MMS

AT+CMMSCID Set the network parameters for MMS
Test Command
AT+CMMSCID=?
Read Command
AT+CMMSCID?
Write Command
AT+CMMSCID=
<value>
Parameters
Reference
13.2.4

AT+CMMSSENDCFG Set the Parameters for sending MMS

AT+CMMSSENDCFG Set the parameters for sending MMS
Test Command
AT+CMMSSENDCFG=?
Read Command
AT+CMMSSENDCFG?
SIM5300E AT Command Manual V1.02
<Gateway> IP address of MMS proxy.
<Port> Port of MMS proxy.
Note
Response
+CMMSCID: (1-3)
OK
Response
+CMMSCID: <value>
OK
Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
<value> network parameters, refer to AT+SAPBR
Note
Response
+CMMSSENDCFG: (0-6), (0-3),(0,1), (0,1),(0-2),(0-4),(1-2),(0,1)
OK
Response
+CMMSSENDCFG:
<valid>,<pri>,<sendrep>,<readrep>,<visible>,<class>,<subctrl>,<notifrspche
ck>
OK
211