SimCom SIM5300E At Command Manual page 151

Read Command
AT+CGEQREQ?
Write Command
AT+CGEQREQ
=<cid>[,<Traffic_class>[,<Maxi
mum_bitrate_UL>[,<Maximu
m_bitrate_DL>[,<Guaranteed_
bitrate_UL>[,<Guaranteed_bit
rate_DL>[,<Delivery_order>[,<
Maximum_SDU_size>[,<SDU_
error_ratio>[,<Residual_bit_er
ror_ratio>[,<Delivery_of_erro
neous_SDUs>[,<Transfer_dela
y>[,<Traffic_handling_priority
>[,<Source_statistics_descript
or>[,<Signalling_indication>]]]
]]]]]]]]]]]
Parameters
SIM5300E AT Command Manual V1.02
Response
+CGEQREQ:
<cid>,<Traffic_class> ,<Maximum_bitrate_UL>,<Maximum_bitrate_DL> ,<G
uaranteed_bitrate_UL> ,<Guaranteed_bitrate_DL>,<Delivery_order> ,<Maxi
mum_SDU_size> ,<SDU_error_ratio> ,<Residual_bit_error_ratio> ,<Delivery
_of_erroneous_SDUs> ,<Transfer_delay> ,<Traffic_handling_priority>[,<Sou
rce_statistics_descriptor>,<Signalling_indication>][<CR><LF>+cgeqreq:
<cid>,<Traffic_class> ,<Maximum_bitrate_UL> ,<Maximum_bitrate_DL> ,<G
uaranteed_bitrate_UL> ,<Guaranteed_bitrate_DL>,<Delivery_order> ,<Maxi
mum_SDU_size> ,<SDU_error_ratio> ,<Residual_bit_error_ratio> ,<Delivery
_of_erroneous_SDUs> , <Transfer_delay>, <Traffic_handling_priority> [,
<Source_statistics_descriptor> , <Signalling_indication>][...]]
OK
OK
If error is related to ME functionality:
+CME ERROR: <err>
<cid>
A numeric parameter which specifies a particular PDP context definition (see
+CGDCONT and command). The following parameters are defined in 3GPP TS
23.107[46].
<Traffic_class>
A numeric parameter that indicates the type of application for which the
UMTS bearer service is onfirmat. 0 conversational (default)
1 streaming
2 interactive
3 background
Other values are reserved.
<Maximum_bitrate_UL>:
A numeric parameter that indicates the maximum number of kbits/s
140