At+Cipoption Set Tcp Option; At+Cipsendhex Set Cipsend Data Format To Hex - SimCom SIM5300E At Command Manual

7.2.30

AT+CIPOPTION Set TCP Option

AT+CIPOPTION Set TCP Option
Test Command
AT+CIPOPTION =?
Read Command
AT+CIPOPTION?
Write Command
AT+CIPOPTION=<nodelay>
Parameter
Reference
7.2.31

AT+CIPSENDHEX Set CIPSEND Data Format to Hex

AT+CIPSENDHEX Set CIPSEND Data Format to HEX
Test Command
AT+CIPSENDHEX=?
Read Command
AT+CIPSENDHEX?
Write Command
AT+CIPSENDHEX=<mode>
Parameters
SIM5300E AT Command Manual V1.02
Response
+CIPOPTION: (list of supported <nodelay>s)
OK
Response
+CIPOPTION: <nodelay>
OK
Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
<nodelay>
0 Disable
1 Enable TCP no delay function.
Response
+CIPSENDHEX: (list of supported <mode>s)
OK
Response
+CIPSENDHEX: <mode>
OK
Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
<mode>
0 The default format of output data in AT+CIPSEND.
1 Set the input data in HEX format when using CIPSEND
command to send data.
173