At+Ftpmode Set Active Or Passive Ftp Mode; At+Ftptype Set Ftp Transfer Type - SimCom SIM5300E At Command Manual

Test Command
AT+FTPPORT=?
Read Command
AT+FTPPORT?
Write Command
AT+FTPPORT=<value>
Parameters
Reference
11.2.2

AT+FTPMODE Set Active or Passive FTP Mode

AT+FTPMODE Set Active or Passive FTP Mode
Test Command
AT+FTPMODE=?
Read Command
AT+FTPMODE?
Write Command
AT+FTPMODE=<value>
Parameter
Reference
11.2.3

AT+FTPTYPE Set FTP Transfer Type

AT+FTPTYPE Set FTP Transfer Type
SIM5300E AT Command Manual V1.02
Response
OK
Response
+FTPPORT: <value>
OK
Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
<value> The value of FTP Control port, from 1 to 65535.
Default value is 21
Note:
Numbers above 65535 are illegal as the port identification fields are 16
bits long in the TCP header.
Response
OK
Response
+FTPMODE: <value>
OK
Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
<value>
0 Active FTP mode
1 Passive FTP mode
189