Atv Ta Response Format - SimCom SIM5300E At Command Manual

Read Command
ATS7?
Write Command
ATS7=<n>
Parameters
Reference V.25ter
2.2.14

ATV TA Response Format

ATV TA Response Format
Execution Command
ATV<value>
Parameters
ReferenceV.25ter
SIM5300E AT Command Manual V1.02
Response
<n>
OK
Response
This parameter setting determines the amount of time to wait for the
connection completion in case of answering or originating a call.
OK
If error is related to ME functionality:
+CME ERROR: <err>
<n>
1-255 Number of seconds to wait for connection completion(60 is
the default value)
Note:
If called party has specified a high value for ATS0=<n>, call setup may
fail.
The correlation between ATS7 and ATS0 is important.
Example: Call may fail if ATS7=30 and ATS0=20.
ATS7 is only applicable to data call.
Response
This parameter setting determines the contents of the header and trailer
transmitted with result codes and information responses.
When <value>=0
0
When <value>=1
OK
<value>
0 Information response: <text><CR><LF>
Short result code format: <numeric code><CR>
1 Information response: <CR><LF><text><CR><LF>
Long result code format: <CR><LF><verbose code><CR><LF>
The result codes, their numeric equivalents and brief descriptions of the use
of each are listed in the following table.
13