At Commands For Ping Application; Overview; Detailed Descriptions Of Commands; At+Cipping Ping Request - SimCom SIM5300E At Command Manual

8.

AT Commands for PING Application

8.1

Overview

Command
AT+CIPPING
AT+CIPCTL
AT+CIPFLT
8.2

Detailed Descriptions of Commands

8.2.1

AT+CIPPING PING Request

AT+CIPPING PING Request
Test Command
AT+CIPPING=?
Read Command
AT+CIPPING?
Write Command
AT+CIPPING=<IPaddr>[,<retr
yNum>[,<dataLen>[,<timeo
ut>[,<ttl>]]]]
SIM5300E AT Command Manual V1.02
Description
PING Request
Set the Mode When Receiving an IP Packet
SET THE RULES OF IP FILTER
Response
+CIPPING: (list of supported <retryNum>s),(list of supported <dataLen>s),(list of
supported <timeout>s),(list of supported <ttl>s)
OK
If error is related to ME functionality:
+CME ERROR: <err>
Response
+CIPPING: <retryNum>,<dataLen>,<timeout>,<ttl>
OK
If error is related to ME functionality:
+CME ERROR: <err>
Response
+CIPPING: <replyId>,<Ip Address>,<replyTime>,<ttl>[<CR><LF>
+CIPPING: <replyId>,<Ip Address>,<replyTime>,<ttl>
[...]]
OK
176