At+Gsmbusy Reject Incoming Call - SimCom SIM5300E At Command Manual

Reference
5.2.26

AT+GSMBUSY Reject Incoming Call

AT+GSMBUSY Reject Incoming Call
Test Command
AT+GSMBUSY=?
Read Command
AT+GSMBUSY?
Write Command
AT+GSMBUSY=<mode>
Parameters
Reference
SIM5300E AT Command Manual V1.02
<rac> string type; one byte routing area code in hexadecimal format.
<AcT_creg>
0 disable the
parameter<AcT>
1 enable the
parameter<AcT>
<AcT_cgreg>
0 disable the command"AT+CGREG" to return parameter
<AcT>&<rac>.
1 enable the command"AT+CGREG" to return parameter
<AcT>&<rac>.
Note:
Read command returns the network-attached mode.
Write command controls the presentation of <AcT>in +CREG and
<AcT>&<rac>in +CGREG
Response
+GSMBUSY: (list of supported<mode>s)
OK
Response
+GSMBUSY: <mode>
OK
Response
OK
If error is related to ME functionality:
+CME ERROR: <error>
<mode>
0 Enable incoming call
1 Forbid all incoming calls
2 Forbid incoming voice calls but enable CSD calls
Note:
The parameter is not saved if the module power down.
command "AT+CREG"
command "AT+CREG"
to return
to return
108