At+Csta Select Type Of Address - SimCom SIM5300E At Command Manual

Parameters
Reference
3GPP TS 27.007 [13]
3.2.13

AT+CSTA Select Type of Address

AT+CSTA Select Type of Address
Test Command
AT+CSTA=?
Read Command
AT+CSTA?
Write Command
AT+CSTA=<type>
Parameters
Reference
3GPP TS 27.007 [13]
SIM5300E AT Command Manual V1.02
character strings correctly between the TE and ME character sets.
OK
If error is related to ME functionality:
+CME ERROR: <err>
<chset>
"GSM" GSM 7 bit default alphabet (3GPP TS 23.038);
"UCS2 "16-bit universal
(ISO/IEC10646); UCS2 character strings are converted to
hexadecimal
"004100620063" equals three 16-bit characters with decimal
values 65, 98 and 99
"IRA" International reference alphabet (ITU-T T.50)
"HEX" Character strings consist only of hexadecimal numbers from 00
to FF;
Response
+CSTA: (list of supported <type>s)
OK
Response
+CSTA: <type>
OK
Response
OK
If <type> is not in the parameter range:
ERROR
<type> Current address type setting.Type of address octet in integer
format;
129 Unknown type
161 National number type
145 International number type
177 Network specific number
Note:
The ATD Command overrides this setting when a number is dialed.
multiple-octet coded
numbers from 0000
character set
to FFFF; e.g.
33