At+Cgreg Network Registration Status - SimCom SIM5300E At Command Manual

6.2.10

AT+CGREG Network Registration Status

AT+CGREG Network Registration Status
Test Command
AT+CGREG=?
Read Command
AT+CGREG?
Write Command
AT+CGREG=[<n>]
Parameters
SIM5300E AT Command Manual V1.02
Response
+CGREG: (list of supported <n>s)
OK
Response
+CGREG: <n>,<stat>[,<lac>,<ci>]
OK
Note: the last two parameters presentation determined by AT+CSACT.
If error is related to ME functionality:
+CME ERROR: <err>
Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
<n>
0 Disable network registration unsolicited result code
1 Enable network
+CGREG:<stat>
2 Enable network registration and location information
unsolicited result code +CGREG: <stat>[,<lac>,<ci>]
<stat>
0 Not registered, MT is not currently searching an operator to
register to.The GPRS service is disabled, the UE is allowed to
attach for GPRS if requested by the user.
1 Registered, home network.
2 Not registered, but MT is currently trying to attach or
searching an operator to register to. The GPRS service is
enabled, but an allowable PLMN is currently not available. The
UE will start a GPRS attach as soon as an allowable PLMN is
available.
3 Registration denied, The GPRS service is disabled, the UE is not
allowed to attach for GPRS if it is requested by the user.
4 Unknown
5 Registered, roaming
<lac> String type (string should be included in quotation marks); two byte
location area code in hexadecimal format (e.g. "00C3" equals 195 in decimal)
registration unsolicited result code
134