At+Cipcsgp Set Gprs For Connection Mode; At+Cipsrip Show Remote Ip Address And Port When Received Data - SimCom SIM5300E At Command Manual

Reference
7.2.20

AT+CIPCSGP Set GPRS for Connection Mode

AT+CIPCSGP Set GPRS for Connection Mode
Test Command
AT+CIPCSGP=?
Read Command
AT+CIPCSGP?
Write Command
AT+CIPCSGP=<mode>[,(<apn>,
<user name>,<password>)]
parameters
Reference
7.2.21 AT+CIPSRIP
Received Data

AT+CIPSRIP Show Remote IP Address and Port When Received Data

SIM5300E AT Command Manual V1.02
<channel id> Channel id
<bearer> GPRS bearer
Note:
This command is allowed to establish a TCP server only when the state is
IP INITIAL or IP STATUS when it is in single state. In multi-IP state, the
state is in IP STATUS only.
Response
+CIPCSGP: 1-GPRS,APN,USER NAME,PASSWORD
OK
Response
+CIPCSGP: <mode>, <apn>, <user name>, <password>
OK
Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
<mode> A numeric parameter which indicates the wireless connection
mode
1 set GPRS as wireless connection mode
<apn> A string parameter which indicates the access point name
<user name> A string parameter which indicates the user name
<password> A string parameter which indicates the password
Note
Show Remote IP Address and Port When
164